Orchestrator User Manual
Section1
Section One introduces the
Orchestrator Product and outlines
how to install the Orchestrator Software
|
Section 2
Section Two explains how the
Orchestrator package is used.
How to launch and control it.
How to save and open configuration files . |
Section 3
Section Three describes in detail
how to configure Datascan Device
Channels in Orchestrator
|
Section 4
Section Four covers the
configuration of Orchestrator
Processor Channels
|
Section 5
Section Five details the
Data Monitor Displays.
These include:
Channel Monitor
Alarm Monitor
Configurable Monitor |
Section 6
Section Six provides details
on the Logging Utilities
available within Orchestrator
|
Section 7
Section Seven details the
use of the Data Export and
Replay Options available in
Orchestrator. |
Section 8
Section Eight details the
use of the Trend Replay
Options available in
Orchestrator. |
Section 9
Section Nine explains how
to use Orchestrators
Dynamic Data Exchange
Capabilities |
Section1
Section one introduces the
Orchestrator Product and outlines how to install the Orchestrator Software
Introduction
Main Features
Software
Architecture
Client
Software Features
Orchestrator
Configuration
Data Acquisition
Real Time
Calculator
Alarm Processing
Data Logging
Trends
Orchestrator Server Installation
Hardware
requirements
Sentinel
Driver Installation
Installing
Orchestrator Server
Orchestrator
File Structure
Uninstall
Utility
Orchestrator Client Installation
Hardware
Requirements
Network
and Orchestrator Server Preparation
Sentinel
Driver Installation
Installing
Orchestrator Client
Return to Contents
Section 2
Section Two explains how the
Orchestrator package is used. How to launch and control it. How to save and open
configuration files
Using Orchestrator
Configuring
Orchestrator Channels
Configure
Device Channels
Configure
Processors
Configure
& Control Loggers
Configure
and Use Replays
Configure
and Use Monitors
Controlling
Orchestrator
Status Bar
Opening
and Saving Configurations
Using Orchestrator Client
Running Orchestrator Client & Selecting a Data Server
Orchestrator Menu Options
File Menu
View menu
Control Menu
Monitors Menu
Replay Menu
Processors
Menu
Loggers Menu
Return to Contents
Section 3 Datascan Device
Datascan
Quick Configuration Guide
Datascan
Configuration Menu
Saving
Datascan Configurations
Datascan
Device Errors
Configure
Datascan Module
Copying
Module Configurations
Controlling
Datascan
Configuring A Datascan Channel
Analogue Input
Channels.
Digital
Input Channels.
Counter
Input Channels
Analogue
Output Channels.
Digital
Output Channels.
Return to Contents
Section 4 Orchestrator Processor
Channels
User
Digital Channel Description
History
Channel Description
Calculator
Channel Description
Alarm
System Description
User Analog Configuration
Advanced
User Analog Configuration
AutoEnable User
Analogs
Auto Save
Saving the
Configuration
Copy and Paste
Shortcuts
Configure
User Analog Channel
Windows Buttons
User Digital Configuration
Advanced
User Digital Configuration
AutoEnable
User Digitals
Auto Save
Saving the
Configuration
Copy and Paste
Shortcuts
Configure
User Digital Channel
Enable Channel
Event checking
Alarms
Windows Buttons
History Channel Configuration
Advanced
History Configuration
AutoEnable
History Channels
Saving the
Configuration
Copy and Paste
Shortcuts
Configure
History Channels
Calculated Channels
Advanced
Calculator Configuration
AutoEnable
Calculator
Saving
the Calculator Configuration
Copy and Paste
Shortcuts
Configure
Calculator Channel
Significant Change
Event Checking
Low and High Alarm Checking
Formula
Window Buttons
Calculator Formulae
Introduction
Formula
Construction
Operators
Calculation Formula Timing
Example Formulae
Compiler Errors
Alarm System Configuration
Common Alarm Output
Alarm Printer
Alarm Logging
Advanced
Alarm Configuration
Saving
Alarm Configuration
Return to Contents
Section 5 Channel Monitor
Channel Monitor Window
Create
New Channel Monitor Window
Organising
Windows
Font Selection
Navigating
Windows
Closing Windows
Exiting
Channel Monitor Application
Print Channel Results
Modifying
Channel Values
Analog Channels
Digital Channels
Alarm
Acknowledgement
Common Alarm
Alarm Monitor
Alarm Monitor Window
Creating
A New Alarm Monitor Window
Selection
Criteria
Alarm Display
Options
Configuring
Colour and Sound
Organising
Windows
Font Selection
Closing Windows
Exiting
Alarm Monitor Window Application
Printing Alarms
Print Preview
Alarm Handling
Alarm Annunciation
Alarm
Acknowledgement
Cancel Common
Alarm
Mask Alarms
Start
Updating and Stop Updating
Configurable Monitor
Monitor
Configure
Drawing and Configuring Channels
Configuring
Data Source Properties
Configuring
Visual Properties
Configuring
Display Options
Drawing Shapes
To Draw
Shapes/Objects
Configuring
Shapes
Using the Channel Configuration Wizard
Steps
To Configure a Channel using the Channel Configuration Wizard
Layout Commands
Layout Functions
Value Entry Mode
Changing a
channel value
Acknowledging
an Alarm
Configuring Communication Settings
Recovery Rate
Update Rate
Setting
Communications Rates
Setting
the Recovery Rate
Setting the
Update Rate
Setting
the Update Rate for Server
Setting
Update Rate for Source
Editing View Options
Configure
Grid Settings
Set
Default Visual Properties
Overview of
Menu Items
File Menu Commands
Edit Menu
Commands
View Menu
Commands
Draw Menu
Commands
Object Menu
Commands
Monitor Menu
Commands
Window Menu
Commands
Help Menu
Commands
Return to Contents
Section 6: Logger Configuration
Selecting a Logger
Logger Name
Autostart
Logger Type
Period Logger
Period Event
Logger
Event
Logger - Multiple Logs
Event
Logger - Single Shot
Logger Operation Mode
Start Mode
Start and Stop
Times
Delete Logs
Cycle Mode
On Time
On Event
Channel Configuration
Event
Mode Channel Configuration
Logger Text
Configuration
Advanced
Logger Configuration
Write To Disk Time
Buffer Size
Logger Directory
Saving Logger
Configuration
Logger Control
Logger Control
Functions
Control
via Configuration Window
Control
via Orchestrator Window
Log Files
Logged Data
File Size
Logged
Data File Structure
Return to Contents
Section 7: Data Export
Configuring Data for Export
Start Time
Stop Time
Header On
Export
Replay Channels
Time Base
Time Units
Long Date Format
Value Width
Value Precision
Delimiter
End Line
Exporting Data
File Name
Save in
Save File as Type
Network
Exporting
to Microsoft Excel
Exporting
to Lotus 1-2-3
Printing Logged Data
Return to Contents
Section 8: Orchestrator Trend Replays
Launching Trends
Trends Window
Quick
Start to Trends
Configuring a
Trend
Trend Options
Trend Options
Page
Display Options
Channel
Based Options
Value Bar
Options Page
Values Display
Grid Options
Page
Horizontal Grid
Colour
Options Page
Fonts Options
Page
Select
a Logged Data File
Add a Line
to a Trend
Editing a Line
Delete a Line
Examining
a Completed Trend Graph
Using The Cursor
Selecting
an Area of a Trend
Zooming in
on a trend
Panning
Through a Trend
Examining
a Real Time Data
File
Enter a Text Log
Data Export
Printing A Trend
Print
command (File menu)
Print dialog box
Print
Progress Dialog
Print
Preview command (File menu)
Print
Set-up command (File menu)
Saving
a Trend Configuration
Save Command
Retrieving
a Trend Configuration
File Open
1,
2, 3, 4 (recent files) command (File menu)
Creating
New Trend Windows
Copying Traces
Navigating
Trend Windows
Return to Contents
Section
9: Dynamic Data Exchange
Starting and Stopping DDE
Automatic
Manual
Priority
Using DDE to Link to other Applications
Microsoft Excel Spreadsheets
Microsoft Access Database
DDE across Networks
Using Network DDE
to Link to other Applications
Microsoft Excel Spreadsheets
Return to Contents
|